Can PDMS be set to automatically update the diameter of pipes?

2019-10-25View Original

Thread Content

Can PDMS be set to automatically update the diameter of pipes (flanges, elbows, valves, etc.)? For example, a pipe is connected to a device flange; the pipe flanges, elbows, valves, etc. have already been installed. The original diameter of the device flange was DN200, but it was later changed to DN250, while all other parameters of the flange remained unchanged. Does this pipeline require the removal of the original flanges and other fittings, followed by their reinstallation? It is still possible to enter commands or perform operations to automatically update the diameter of the entire pipeline. Thank you

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.

Can PDMS be set to automatically update the diameter of pipes?

Thread Content

Related Threads in This Forum

← Previous

Next →

Submit a Project

Disclaimer

Quick Links