Thread Content
When using the HaoChen CAD drawing software to create drawings, it is sometimes necessary to combine two CAD drawings into one. How should this be done? Next, I’ll introduce the detailed steps for you! Method 1: Inserting a block 1. Open one of the drawings in HaoChen CAD. As shown in the figure below: 2. Click the “Insert”—“Block” command in the interface menu bar. 3. The system will automatically display the “Insert Block” dialog box. As shown in the figure below: we click the “Browse” button on the right to select another drawing file. 5. Check the “Specify on screen” option and the “Break apart” checkbox, then click the Insert button. As shown in the figure below: use the left mouse button to insert, and then enter the scale factor and rotation angle of the graphic according to the instructions displayed in the command line, and the drawings will be merged. Method 2: Copy and paste 1. Open the HaoChen CAD software and load two drawings. As shown in the figure below: select the drawing content that needs to be copied, and use the Ctrl+C key combination to copy it. As shown in the figure below: Open another drawing, click on a certain area, and use the Ctrl+V shortcut key to paste. As shown in the figure below: In this way, the two drawings are combined together. The above are the two methods for merging two CAD drawings into one using the Haochen CAD drawing software. Everyone can refer to these tutorials when encountering similar problems in the future; I hope they will be helpful to all of you!