Thread Content
When we use Haochen CAD drawing software to draw drawings, sometimes we need to insert references into the CAD drawings. How to adjust when the inserted references are dark? Next, I will give you a detailed tutorial on how to adjust the light and shade of reference graphics in CAD drawings. The method to adjust the light and shade of reference graphics in CAD drawings is as follows:: 1. First use Haochen CAD drawing software to open the corresponding graphics file. 2. As shown in the figure below, the one on the right is the inserted external reference, and the display effect is relatively dark. 3. Click the "Tools"-"Options" button on the interface menu bar, and the system will display the "Options" setting dialog box, as shown in the figure below: 4. We switch to the "Display" tab and find the "Xref Display" option on the right. There is a value and a pull bar below. 5. Pull this pull bar and you can find that its value will change accordingly. The larger the value, the darker the frame will be. Here, we pull the pull bar to the far left, the value displays -90, and finally click the "Apply" and "Confirm" buttons. As shown below: 6. In this way, we can find that the external reference just inserted becomes brighter. As shown below: The above is our solution to the problem that the reference graphics are very dark when inserting external references into the CAD drawings when using Haochen CAD drawing software. I hope it will be helpful to everyone.