Thread Content
When using the Haochen CAD drawing software to create drawings, it is sometimes necessary to know the number of graphics in the CAD drawing; in such cases, the quick counting function can be used to determine the number of graphics in the drawing rapidly. Next, I’ll share with you a CAD tutorial for quickly counting the number of shapes in a drawing! The steps for quickly counting the number of graphics in a CAD drawing are as follows: 1. First, use HaoChen CAD to open the CAD drawing, then enter the command “QSELECT” in the command line and press Enter to confirm it. 2. This will allow you to exit the “Quick Selection” window and select the corresponding object type; here, select “All Elements”. As shown in the figure below: 3. Select the search range; here, choose the known shapes and apply them to “Current Selection”. As shown in the figure below: 4. Select properties, including color, layer, line width, linear scale, and so on. 5. Select an operator, with five options: equal to, not equal to, greater than, less than, and select all. 6. Select the value corresponding to each characteristic; the value for each characteristic is different. 8. Click “OK”, and the number of objects will be displayed in the command bar. The above is a detailed tutorial on how to quickly count the number of graphics in CAD drawings using the HaoChen CAD drawing software. Friends, in future drawing tasks where you need to count the number of elements in CAD drawings, you can refer to this CAD tutorial to carry out such counting quickly~