Thread Content
What should some users do if they can’t find the tool for drawing arcs when using the computer version of Haochen CAD ViewKing to edit drawings? Next, I’ll introduce to you the tutorial on how to draw arcs in the computer version of Haochen CAD ViewKing! In the computer version of Haocheng CAD ViewKing, the drawing functions available include tools such as lines, polylines, circles, and rectangles, which allow for the creation of various CAD shapes. Today, I will demonstrate how to draw an arc with an angle of 60°, a radius of 10, and a chord that is horizontal. The steps for drawing arcs in HaoChen CAD ViewKing are as follows: Step 1: Open the drawing in the computer version of HaoChen CAD ViewKing, and switch from [View Mode] to [Edit Mode] in the upper left corner of the interface. Select the [Edit] menu bar under [Edit Mode], click the [Polyline] command, and specify the starting point of the arc on the interface. Step 2: As indicated by the dialog box on the interface, enter A first to access the arc function ； Enter A again to proceed to the setting of the arc angle ； Enter the angle of the arc: 60. Step 3: Once the angle of the arc is determined, we will determine its radius. Input: R to enter the arc radius setting ； Enter the arc radius as 10. Step 4: Finally, we will specify the direction of the arc’s chord. If the input is 0, the direction of the arc chord is horizontal. Then: Enter. In this way, an arc with an angle of 60°, a radius of 10, and a horizontal chord direction is drawn. The above are the detailed steps for drawing arcs in the Haochen CAD ViewKing desktop version; those who are not familiar with this can refer to the above CAD tutorial.