Thread Content
When using CAD drawing software to view DWG files, how can one adjust the size of CAD annotation text that is too small in the drawings? The Computer Version of Haochen CAD ViewKing offers various annotation methods, including linear annotation, aligned annotation, angle annotation, and coordinate annotation. The purpose of annotations is to display information on the drawing, so the size of the dimension text in CAD must be appropriate. Next, I’ll share with you the tips for adjusting the size of CAD dimension text in the CAD viewing software HaoChen CAD ViewKing for computers! Solutions for overly small text in CAD drawings: 1. In the computer version of Haochen CAD Viewer, the font size used for marking dimensions is very small; as shown in the image below, when you open the [Dimension Style] settings, you can see that the height of the text and the size of the arrows are set to 0.0003. 2. Change the [Text Height] and [Arrow Size] to 3, as shown in the image below. 3. With the values changed from 0.0003 to 3, the text and arrows become significantly larger. As shown in the figure below: PS: The tutorial above is mainly intended to demonstrate how to set the font size; the multiplication factor for enlarging the numbers was chosen to be high so that it’s easier to see. In actual drawing, you can adjust the settings according to your needs. The above are the detailed steps for using the CAD viewing software Haocheng CAD ViewKing (computer version) to modify the size of text annotations in CAD files. In the future, if the text in a drawing turns out to be too small, you can refer to this CAD tutorial to resolve the issue.