3D pipeline design software PipeCAD

Thread Content

PipeCAD – Keywords for Piping Components. PipeCAD is a 3D piping design software used for pipeline modeling; Piping Design1 Introduction: Pipeline design software. PipeCAD already enables the creation of pipes (PIPE) and branches (BRANCH). The main function of pipeline design is to arrange the fittings within these pipes, such as flanges and valves. Since the pipe fittings are implemented in a parametric manner, their creation requires connecting design data with component library data through the pipeline-level SPEC. The creation of pipe fittings also requires addressing the issue of model positioning: in the component library, pipe fittings are modeled in a local coordinate system, and it is necessary to convert them to the actual position of the design model. Level filtering is provided based on the level SPEC of the branch BRANCH; first, it is done according to the major category types such as Elbow, Flange, Valve, etc ； Then filter according to Skey. Through Skey filtering, users can get an understanding of the pipe fitting symbols on the ISO diagram; in fact, Skey has already classified the pipe fittings to prevent a chaotic variety of filtering types. There are currently two ways to create fittings using the 2 Connect Component: connecting directly via Connect, or placing them by clicking a point in the model via Place. After the fitting model is created, the following quick positioning functions can be used to adjust the fitting’s position rapidly. It can also be adjusted using the Model Editor later on. 3 Conclusion The pipeline design software PipeCAD basically implements the piping component modeling function. Currently, it is mainly the function verification phase; the next step will be to refine the details in the modeling process by creating a factory model. We are committed to developing domestic 3D pipeline design software that does not rely on AutoCAD. If you have any comments or suggestions, feel free to share them.