Release of the autonomous and independent platform 3D factory design management system UKP3d9.1

Thread Content

This post was last edited by uksoft on 2023-8-16 at 19:39. UKP3d9.1 adds a precise positioning coordinate system to facilitate positioning in different scenarios. The operation smoothness has been improved after upgrading the display model. Bidirectional interfaces with Revit and AVEV PDMS have been added. Read the rvm file to display the model. I. UKP3d9.1 adds the following functions: Functions are as follows: General functions 1. The positioning method has been modified, with a function for precise coordinate positioning added. 2. It significantly improved the smoothness of operations after displaying the model. 3. The capture points on the surface were removed to avoid interfering with other key capture points. 4. The model of logical support brackets has been optimized to highlight the differences between various types of brackets. 5. The position of the + sign clip point in the middle of the tube has been improved to avoid overlap with the moving clip point. 6. The graphics of the port capture points have been improved to highlight the difference from 2D capture points. 7. Improved to prioritize executing commands with a higher matching degree when entering commands. 8. The automatic connection panel has been moved below the piping panel. Interface module 9: Importing and exporting UKP3d pipe models to Revit. 10. Importing and exporting UKP3d pipe models to AVEVA PDMS (importing is not required; export settings and component libraries are relevant). 11. Import Rvm file into UKP3d. Table module 12: Optimized the table headers of the stress analysis result report. 13. A function to set the table spacing for displaying combined tables has been added. Management Module 14: The management module has been optimized; it is used to assign database permissions (creating users, user groups, databases, and database groups). The bugs that have been fixed are as follows: 1. Fixed the bug where predefined shortcuts could not be saved. 2. Fix the bug where fittings and pipes cannot connect automatically during automatic connection. 3. Other known bugs have been fixed. Introduction to key features: 1. Precise positioning coordinate system – A precise positioning coordinate system has been added, offering functions such as setting the adsorption angle, locking the direction, switching planes, specifying alignment points for direction locking, and setting alignment distances. 2. The display model has been improved, which enhances the smoothness of operations; scaling, moving, rotating, and other actions are performed very quickly when using this improved display model. So far, only the speed compared to AVEVA PDMS has been examined; UKP3d offers smoother operation. (Model displayed by UKP3d) (Model displayed by AVEVA PDMS) 3. Bidirectional interface between UKP3d and Revit: Models from UKP3d can be exported to Revit; this functionality is available in version 9.0. Importing relatively complex pipe network models from Revit into UKP3d yields the results shown in the following figure: (Revit model) (Model imported from Revit into UKP3d). 4. Two-way interface between UKP3d and AVEVPDMS – When UKP3d pipe models are imported into PDMS, the results are as shown in the following figure: (UKP3d model) (Model imported from UKP3d into PDMS); when PDMS pipe models are imported into UKP3d, the results are as shown in the following figure: (PDMS model). UKP3d: (Model imported from PDMS into UKP3d). 5. Importing Rvm files adds the capability to read such files; it allows for the display of the node hierarchy, 3D models, and their attributes, with the 3D models being able to be used in collision checks. (The node hierarchy and models of rvm) Welcome to www.uesoft.com to download and use it!