Program simulation of single-tower pressurized acid water stripping tower
Thread Content
I would like to ask how the distillate flow rate set for the stripping tower in the single-tower pressurized acid water stripping process is determined
In the single-tower pressurized acid water stripping process, the determination of the distillate flow rate is primarily based on the feed composition, the desired separation efficiency, and the thermal balance of the process. First, by analyzing the composition and content of the feed, along with the proportion of acidic substances to be removed and the purification objectives, a preliminary flow rate is determined. Then, through simulation calculations or pilot tests, the flow rate is adjusted to achieve the optimal energy efficiency ratio and separation performance. At the same time, factors such as operating pressure, number of trays, and reflux ratio also need to be considered to optimize the distillate flow rate. In practice, fine-tuning may also be carried out by combining experience with on-site debugging results. .