HTRI operation problems
Thread Content
When various data are input into HTRI and run, "All run failed, To determine the cause double-click on a case or select View Case from the menu." always appears. What's going on? I entered the data according to the tutorial and felt that there were no errors in the input. . . . . . Experts please answer, thank you!
HTRI has experienced experts in China to provide technical support. You may wish to send your case to htri .china@htri.net Give it a try and they should provide you with the necessary assistance.
That sentence in English means "All runs failed. To determine the cause, double-click a case or select View from the menu. ”It should be a problem with program installation. Also, is the software authorized? The software vendor should be contacted to resolve the issue.
I also have this problem. I have installed it many times and it still doesn't work.
Encountered the same problem and it has been solved. 1. Crack completely. Make sure the software is OK 2. Double-click the case, read the running warning and check for corrections. PS: The running warning I encountered requires checking the input, and the calculated data is out of range. After checking, sure enough, the flow rate is input in kg/h, and the software unit is kg/s, so. . .