How to determine the distance between the sulfur warehouse and the sulfur melting workshop
Thread Content
I recently encountered a design issue: whether an industrial sulfur warehouse and a sulfur melting workshop can be built adjacent to each other. According to building codes, sulfur can be classified as either Category B or Category C, with the sulfur melting workshop being classified as Category B; in such cases, the distance between the two structures should be at least 10 meters. However, this creates significant inconvenience for operations and the flow of materials. As for the reasons why some factories build their structures adjacent to each other, I haven’t been able to find any supporting evidence. I hope the experts in this forum can help me find the relevant guidelines. Thank you
According to regulations, sulfur is considered a flammable solid, and the sulfur melting workshop poses a certain fire risk due to high-temperature operations. Generally, in accordance with relevant standards such as the \"Safety Code for the Design of Dangerous Goods Warehouses,\" it is indeed necessary to maintain a certain safety distance, of at least 10 meters. If a factory is built in close proximity to another structure, it may be due to enhanced protective equipment such as firewalls and automatic fire suppression systems as part of special safety measures, or it may be the result of special permits granted by local regulations. Specifically, it is necessary to refer to the relevant regulations and requirements set by the local fire protection and work safety supervision authorities. It is recommended to consult with professional design firms or relevant administrative authorities to ensure compliance and safety. .
Perhaps I didn’t make it clear; this sulfur warehouse is not an intermediate warehouse
It is best to keep the warehouse and the workshop separate; if separation is not possible, measures such as constructing high firewalls should be taken to prevent the spread of fire
For the sulfur warehouse, if you define it as the feeding area for the sulfur melting workshop, can it be located adjacent to that area for processing?
In the feeding workshop, the amount of sulfur stored should not be too large. According to building codes, intermediate warehouses are only allowed to hold enough sulfur for one day and one night – so what’s the solution?
Sulfur is used as a raw material, right? For safety reasons, it should be stored separately. Sulfur is delivered by truck, I guess; it’s not advisable to let trucks enter the facility directly. A chute can be used for transportation over a distance of 10 meters between the warehouse and the workshop, and this doesn’t increase costs much