What is an appropriate height setting between the reflux liquid inlet of the glass-lined distillation tower and the PTFE disc distributor?
Thread Content
Comrades: In the diagram below, what is an appropriate height setting between the reflux liquid inlet of the DN400*8000mm glass-lined distillation column and the PTFE disk distributor? Is there any evidence?
Generally, the height setting between the reflux liquid inlet of the glass-lined distillation tower and the PTFE disk distributor should ensure good liquid distribution and prevent splashing. The recommended height is approximately 300 to 500 millimeters. This height range ensures there is sufficient space above the distributor to facilitate even distribution of the liquid, and prevents material spillage or equipment damage caused by the liquid hitting the distributor directly. Specific adjustments are still required based on the actual operating conditions and the fluid dynamics within the tower. .