What type of local level gauge is used for batch vacuum reactors?
Thread Content
For a kettle-type container, in a vacuum or under negative pressure, with a neutral measuring medium at 40 degrees Celsius, what type of level gauge is suitable? In-situ level gauge, top-mounted
The magnetic flap level gauge is relatively simple.
The magnetic flap level gauge is relatively simple.
Is there stirring? Do you mind large density changes?
What should the liquid level range be? A top-mounted float ball will work; if stirring is present, an insertion tube can be installed for protection, with holes drilled in the tube wall
What should the liquid level range be? A top-mounted float ball will work; if stirring is present, an insertion tube can be installed for protection, with holes drilled in the tube wall
What should the liquid level range be? A top-mounted float ball will work; if stirring is present, an insertion tube can be installed for protection, with holes drilled in the tube wall
“Vacuum, negative pressure, on-site level gauge, top-mounted. ”Given these conditions, I personally recommend installing an infrared one.
The reactor – it has an agitator. Are you sure this type of level gauge can be used? I just need it to be displayed locally; no remote transmission is required