What is the pressure drop of 23,500 Nm3/h of nitrogen at 25°C and 7.0 MPa(G) after passing through a 5-kilometer long, 6-inch diameter pipeline?
Thread Content
What is the pressure drop of 23,500 Nm3/h of nitrogen at 25°C and 7.0 MPa(G) after passing through a 5-kilometer long, 6-inch diameter pipeline?
To calculate the pressure drop, more information is required, such as the inner diameter and wall thickness of the pipe, the material used, as well as the flow rate and viscosity of nitrogen. Typically, such calculations use the Darcy-Weisbach equation or other fluid dynamics equations. It is recommended to use professional fluid dynamics software for calculations, or to perform manual calculations by entering more detailed pipe and flow parameters. .
There is no information on the material, the inner diameter of the pipe, or the elbow valves. Based on the current data, the pressure drop is 0.387 MPa