Thread Content
Model High-precision constant temperature bath operating temperature range -15-35℃ Temperature control range 10-150℃ Temperature display accuracy 0.001℃ Temperature control accuracy ±0.005℃ Power 1500W Overview High-precision thermostatic bath, after placing the required medium in the bath, set the temperature through the temperature controller and then turn on the equipment, control the temperature rise of the equipment through the heating pipe, so that the temperature of the medium reaches the temperature set by the thermostat； During the process, the circulating water pump keeps rotating through the impeller, and the liquid continuously enters the water inlet pipe. After passing through the pump body, it is discharged from the pump drain port to maintain constant temperature control. The equipment can also be kept in a constant temperature field, and through the external circulation interface, the constant temperature medium is led out to the equipment that requires constant temperature to provide constant temperature control for other equipment. Product features: 1. The thermostat using advanced temperature control technology ensures bath temperature control accuracy up to 0.005°C. 2. The constant temperature warehouse body is specially designed to maximize the use area and minimize the constant temperature fluctuation rate, ensuring temperature stability. The temperature field uniformity is ± 0.005°C. The unique bottom jet technology ensures uniform temperature. 3. Using compressor refrigeration, even when the ambient temperature is high, it can have enough cooling capacity to quickly cool down and stabilize the temperature. 4. The tank body is designed with stainless steel to maximize the overall service life. 5. Safety low water level alarm, automatically cut off the heating source to prevent dry burning. 6. The pipe joints adopt quick-plug connection. Working principle: 1. The constant temperature warehouse is equipped with a temperature probe to monitor the temperature in real time. 2. Temperature-controlled mixing uses an isolated water pump to stir internal and external water circulation. A temperature probe is installed in the constant temperature chamber to send the temperature to the thermostat. The thermostat uses PID to control the balance of cold and heat to achieve a constant temperature. 3. The depth of the bathtub is 20cm, and the calibration device can be customized at the opening. Precautions for use: The most common problem with bathtubs is that they cannot maintain a constant temperature, which is often caused by improper placement and insufficient daily maintenance. Please pay attention to the following points when setting up and maintaining the system during use.: 1. Please keep this product below 35℃ in a well-ventilated location. 2. Do not place obstacles in the ventilation opening of this product. 3. If the wind blows into the water pipe, the cooling effect will be reduced. The water pipe should be cut as short as possible, but do not bend it. 4. Please pay attention to the dust in the environment and clean the dust at the air inlet in time. Chemical Industry Discussion