Basic Knowledge of Gasification (2018-9-29)
Thread Content
This post was last edited by hai8487 on 2018-9-29 at 14:58. How should one handle emergencies in a grinder? Answer: (1) Quickly press the stop button nearby to shut down the main motor ； (2) Quickly stop all materials ； (3) Add water to the discharge tank to flush the low-pressure slurry pump and slurry pipes ； (4) If the mill can be rotated, flushing water should be added to the mill ； (5) Promptly notify the relevant units to handle it.
Answer: (1) Quickly press the stop button nearby to shut down the main motor； (2) Quickly stop all materials ； (3) Add water to the discharge tank to flush the low-pressure slurry pump and slurry pipes ； (4) If the mill can be rotated, flushing water should be added to the mill ； (5) Promptly notify the relevant units to handle it.
(1) Quickly press the stop button nearby to shut down the main motor. (2) Check the interlock shutdown of each material. (3) The small coal slurry pump is used for circulation. (4) If the mill can be turned manually, flushing water should be supplied to the mill. (5) Promptly notify all relevant units to take action.
(1) Quickly press the stop button nearby to shut down the main motor； ? ?? ??? (2) Stop all materials promptly ； ? ?? ??? (3) Add water to the discharge tank to flush the low-pressure slurry pump and the slurry pipelines ； ? ?? ??? (4) If the mill can be rotated, flushing water should be supplied into the mill ； ? ?? ?? ? (5) Promptly notify the relevant authorities to take action.
(1) Quickly press the stop button nearby to shut down the main motor； (2) Quickly stop all materials ； (3) Add water to the discharge tank to flush the low-pressure slurry pump and slurry pipes ； (4) If the mill can be rotated, flushing water should be added to the mill ； (5) Promptly notify the relevant units to handle it.
(1) Quickly press the stop button nearby to shut down the main motor. (2) Check the interlock shutdown of each material. (3) The small coal slurry pump is used for circulation. (4) If the mill can be turned manually, flushing water should be supplied to the mill. (5) Promptly notify all relevant units to take action.
(1) Quickly press the stop button nearby to shut down the main motor； (2) Quickly stop all materials ； (3) Add water to the discharge tank to flush the low-pressure slurry pump and the slurry pipes; (4) If the mill can be rotated manually, flush water should be added to the mill; (5) Promptly notify the relevant parties to take action.
(1) Quickly press the stop button nearby to shut down the main motor. (2) Check the interlock shutdown of each material. (3) The small coal slurry pump is used for circulation. (4) If the mill can be turned manually, flushing water should be supplied to the mill. (5) Promptly notify all relevant units to take action.
Quickly press the stop button nearby to shut down the main motor. Check for interlock shutdown of various materials. The small coal slurry pump is running in circulation mode. If the mill can be turned around, flushing water should be supplied to the mill. Promptly notify all units to handle it.
(1) Quickly press the stop button nearby to shut down the main motor. (2) Check the interlock shutdown of each material. (3) The small coal slurry pump is used for circulation. (4) If the mill can be turned manually, flushing water should be supplied to the mill. (5) Promptly notify all relevant units to take action.
(1) Quickly press the stop button nearby to shut down the main motor； (2) Quickly stop all materials ； (3) Add water to the discharge tank to flush the low-pressure slurry pump and slurry pipes ； (4) If the mill can be rotated, flushing water should be added to the mill ； (5) Promptly notify the relevant units to take action