Installation method of explosion-proof distribution box

Thread Content

Installation method of explosion-proof distribution boxes: The detailed steps for installing explosion-proof distribution boxes are as follows: Before installing them, it is necessary to select an appropriate location in accordance with the requirements for such installations, and all relevant wiring must be organized properly. Explosion-proof distribution boxes come in two types: those that are installed openly and those that are installed concealed, but the general installation process remains similar for both types. 1--First, the distribution box needs to be disassembled into three parts: the box body, the circuit board inside the box, and the box door ； 2--Next is to install the cabinet, fixing the iron frame in place by welding ； 3--Fix the box to the iron frame again; after installing the box, the next step is to install the core inside it, starting by cleaning out any debris from within the box ； 4--Then straighten the wires, distinguish between the branches and phase sequences, and make proper markings; fix the core of the coil to the housing ； 5--Finally, install the box cover ； 6--After installation, check for any errors, then attempt a discharge.