【Daily Question No. 347】December 19, 2018
Thread Content
【Daily Question No. 347】December 19, 2018: Briefly explain how to justify the regular cleaning and oil change of lubricated parts After one cycle or when the oil deteriorates, it is necessary to clean the lubrication areas and replace the oil with fresh oil. All the oil residues and impurities remaining in the various oil injection points must be removed; these areas should be cleaned with cleaning oil and dried. After that, they should be rinsed with fresh oil, dried again, and then fresh oil should be poured in. (Unless otherwise specified, all questions and answers are based on hydrogenation units.) ) Correct: 3 wealth, Incorrect: 1 wealth ； Mass posting of posts – rated based on the lowest score ； Replies that are unrelated to the answer are considered spam and will be deleted immediately. For management purposes, if you need to view content from a few days ago, please go to https://bbs.hcbbs.com/home.php?mod=space&uid=3862647&do=thread&view=me&from=space through the summary post below
Since lubricant accumulates scale over time and its performance declines, it must be cleaned and the oil replaced
In devices that are already in operation, as the lubricating oil gradually ages and deteriorates, sludge is formed. To ensure the proper functioning of the equipment, it is necessary to replace the lubricating oil regularly, and to clean the rotating parts of the equipment before changing the oil.
After one cycle or when the oil deteriorates, it is necessary to clean the lubrication areas and replace the oil with fresh oil. All oil residues and impurities remaining in the various oiling areas must be removed, and the areas should be cleaned with cleaning oil and dried
After one cycle or when the oil deteriorates, it is necessary to clean the lubrication areas and replace the oil with fresh oil. All oil residues and impurities remaining in the various oiling areas must be removed, and the areas should be cleaned with cleaning oil and dried
After one cycle or when the oil deteriorates, it is necessary to clean the lubrication areas and replace the oil with fresh oil. All the oil residues and impurities remaining in the various oil injection points must be removed, the area cleaned with cleaning oil, dried, rinsed with fresh oil, dried again, and then fresh oil poured in.
Because lubricant accumulates scale over time and its performance declines, it needs to be cleaned and the oil replaced
In devices that are already in operation, as the lubricating oil gradually ages and deteriorates, sludge is formed. To ensure the proper functioning of the equipment, it is necessary to replace the lubricating oil regularly, and to clean the rotating parts of the equipment before changing the oil.
After one cycle or when the oil deteriorates, it is necessary to clean the lubrication areas and replace the oil with fresh oil. All the oil residues and impurities remaining in the various oil injection points must be removed, the area cleaned with cleaning oil, dried, rinsed with fresh oil, dried again, and then fresh oil poured in.
After one cycle or when the oil deteriorates, it is necessary to clean the lubrication areas and replace the oil with fresh oil. All the oil residues and impurities remaining in the various oil injection points must be removed, the area cleaned with cleaning oil, dried, rinsed with fresh oil, dried again, and then fresh oil poured in.
Failing to replace the oil film in the cleaning and lubrication areas over an extended period can easily damage it, preventing it from performing its lubricating function