Regarding the shipment of sulfur
Thread Content
This post was last edited by liaifeng on 2018-8-5 10:58. Question: What technologies are used in the production of sulfur? If it is liquid sulfur leaving the factory, is loading done through a dip pipe or some other method? Is it common for flexible hoses to get clogged? Thanks.
It’s all driven by market demand; there are indeed many advantages to loading liquid sulfur.
It’s that there may be blockages in the liquid sulfur transportation
The blockage in the liquid sulfur pipeline is definitely caused by poor heat tracing of the double-wall tube.
I would like to ask how to ensure the effective operation of the jacket heating for the elbow pipe?
This should be a management issue. It is recommended to use a piece of solid sulfur to make a mark on the jacketed pipeline to check whether sulfurization is occurring.
Vertical dip pipes should be as short as possible; there is basically no risk of blockages. Moreover, transporting liquid sulfur by this method is the prevailing trend – it’s simple to operate and costs little
For flexible hoses, dripping is necessary; it’s simple and convenient. If there’s a blockage, enhance the heat tracing, and everything will be fine