Which tank areas use vaporizers
Thread Content
Do all liquefied hydrocarbon storage areas require vaporizers, and what is the function of vaporizers?
Not necessarily. If the pipeline is long enough and the temperature of the medium is not high, so that the liquid can be converted into a gas upon reaching the destination, then it’s not necessary – this is the case with things like liquefied petroleum gas and propylene. If it is a cryogenic liquefied medium, it must be vaporized before use. Relying on the natural increase in temperature due to the length of the pipes alone is not sufficient for complete vaporization; therefore, a vaporizer is needed so that the medium can be in gaseous form before it can be used. It is mainly the operating temperature of the medium
It mainly depends on your process requirements. If the liquefied hydrocarbon tank does not involve long-distance transportation and there are no high requirements regarding the pressure at the pump inlet, then it is not necessary to use a vaporizer. The function of the vaporizer is to pressurize the storage tank; it is activated only when the pressure in the tank does not meet the required specifications. Carburetors are mostly used in winter.
The key lies in the process requirements; it is added only based on your actual incoming and outgoing needs. Moreover, the carburetor can be replaced by many other devices
It depends on the process requirements of the design; generally, propylene and propane tanks are equipped with vaporizers, and changes in discharge conditions and the environment can cause the tank pressure to drop, sometimes requiring pressure replenishment. Some C4 tanks also have carburetors, which are used to produce fuel gas after heating. Some C4 tank areas do not have vaporizers. It varies!
No, some vaporizers are used to supply materials to downstream devices; they can also help maintain pressure in the storage tanks when temperatures are low. Not all liquid hydrocarbons require vaporizers.