Are there any automatic devices for operating the oil loading/unloading nozzles on trains?
Thread Content
I would like to ask whether railway oil loading/unloading arms have automatic operation, eliminating the need for manual placement into train tanks, and whether such equipment is available domestically and internationally Thank you!
Unloading crane pipe? Unloading usually doesn’t require a crane pipe.
This is a train tank car, and loading and unloading is usually done using railway oil loading arms.
The train loading hose is also part of a complete set of equipment. It’s similar to cars.
Most unloading still requires manual operation, I guess.
There are manufacturers in China; as far as I know, they produce loading nozzles with automatic alignment, and unloading can likely be achieved through corresponding technology as well
Train loading facilities include large and small flexibles, which can be found in Guangxi, Harbin, Yunnan, Guangdong, and other places. With a 50T tank truck, one section can be loaded in roughly 8-10 minutes using a large hose, while it takes about 40 minutes to load one section using a small hose. Large hose pipes are equipped with small crawlers.
Large hoses are fine; small hoses are usually manual.
Aligning the loading hose for trains still requires manual effort, and it is also necessary to manually check whether there are any impurities inside the tank. The oil filling process is automatic.