Discharge capacity of the emergency relief valve of the storage tank

The discharge capacity of the emergency relief valve on a storage tank can be calculated based on factors such as the liquid involved and the size of the tank. Under normal circumstances, the relevant guidelines in the \"GB 50341-2014 Code for Design of Storage Tanks\" can be referred to. According to this standard, the following factors need to be considered in the design of emergency release: 1. Release time: Determine the release time based on the nature of the accident and the requirements. 2. Discharge coefficient: Select an appropriate discharge coefficient based on parameters such as the properties of the liquid, the size of the storage tank, and the pressure. 3. Total discharge volume: The total discharge volume is calculated based on the maximum capacity of liquid storage, the required discharge time, and the discharge coefficient. In the actual calculation process, other factors may also need to be considered, such as the design pressure of the storage tank and the diameter of the relief piping. The specific calculation methods and standards can be determined through corresponding calculations in accordance with the provisions of GB 50341-2014. Please note that the emergency relief design for storage tanks involves safety considerations; it is recommended to consult professional engineers or relevant organizations during the design and calculation process to ensure that the design meets relevant safety standards and regulatory requirements. .