I want to buy a laboratory device that simulates a distillation column
Thread Content
Our company’s laboratory wants to purchase a device that simulates actual distillation processes. The required diameter is 600, with a theoretical number of theoretical plates equal to 45. Could experts advise me on which type of packing to choose and what the appropriate height for the packing should be?
A column with a diameter of 600 and 45 theoretical plates is quite large, larger than typical pilot-scale columns. The packing should be selected based on the system to be separated, site constraints, etc.
Well, this taco is quite large; it has a more efficient structured packing
For a tower with a diameter of 600 mm, the test data is listed from highest efficiency to lowest. Xita ring with a thickness of around 8 mm, at a height of 5–6 meters; perforated corrugated packing 500Y, at a height of around 9 meters; wire mesh corrugated packing 700Y, at a height of 7–8 meters. Give it a try