Regarding the replacement of the oil pump with another type of mechanical seal
Thread Content
Pump model: 32AY60X2. This pump is equipped with a mechanical seal that features large springs; is it possible to replace it with a mechanical seal that uses bellows? Is it universal? What aspects need to be considered when replacing it?
Sure! Large springs are suitable for pumps with a thicker shaft diameter; for pumps with a thinner shaft diameter, small springs or bellows provide better stability! Pay attention to the compression amount when replacing! Diaphragm types are not suitable for use when the medium is quite dirty!
Yes, but the shaft diameter needs to be considered.
Contact Chuanmi’s staff directly. They are very skilled
It can be replaced, but it’s necessary to consider the suitability of the pump fluid for the bellows
Generally, bellows seals are used in high-temperature conditions exceeding 200 degrees. If a large spring seal was chosen originally, was it due to considerations such as a lower temperature of the medium or the presence of impurities? From the perspective of installation dimensions alone, there is no problem.