The whole process of overhaul of Norman compressor imported from Germany
Thread Content
Norman compressor overhaul. 4 units have been overhauled.
Good article, this picture is rare, come and see it in person
Overhaul of Norman compressor imported from Germany. It is a rare compressor overhaul picture. It would be better if it can be accompanied by instructions or maintenance plans: lol
Sir, please give me a brief introduction. How many years has this overhauled machine been in operation before it was repaired? Was it a routine repair and inspection to see what the nature was, or whether any faulty parts were replaced. Let everyone open their eyes. Thank you for sharing!
There are maintenance plans. There are all technical requirements for tolerance fit.
Two of them were overhauled because the bearings were locked and the car could not move. There are two compressors that have been out of operation for 3 years. There is severe corrosion in the crankcase. The surface of the slideway and crankshaft were severely corroded, so they were overhauled.
I also have lots of pictures of compressor overhauls.
It's so small. The normal setting is how many hours of operation it needs to be overhauled. It needs to be completely disassembled and the data measured again. Some parts need to be replaced.
Full of useful information for the author to like:)