Please select a suitable model for the pump
Thread Content
Currently, 3 pumps are used to draw water out of the tank: 2 centrifugal pumps and 1 water-sealing pump, with models 200S-42, 200S-63, and 80GDL36-12*5. There are 2 pumps used to fill the tank with water; one runs continuously – its model is unknown – and the other starts running when there is a lack of water. It takes about 10 minutes to fill the tank completely; the model of that pump is 250S-24A. Filling the tank takes around over an hour each time, which is a great waste of time. The shut-off valves are adjusted to be set very low, so that only a minimal amount of water flows out.
Call 18032233998 or consult via WeChat.
Just use one with a capacity of around 100 cubic meters.
The other one is around 500-550
The pump valve with a capacity of 280 cubic units is open by less than half; the other pump’s capacity is around 460–500 cubic units. I’ll ask them when I have time.