【Ten Years of Rapid Development in Chemical Engineering Equipment】By 2022, Baoji Petroleum Machinery built China’s largest fracturing equipment testing center

Thread Content

This post was last edited by Desert Fish on 2022-12-16 at 09:05. Witness the decade-long development of chemical engineering equipment; praise the prosperity and strength of modern China. Replies are rewarded; discussions are welcome. ------------------------------------------- Recently, the fracturing equipment testing center of Baoji Petroleum Machinery Company was completed and put into use. By mid-November, the testing center had completed the factory tests for 7 Type 5000 electric fracturing skids, 4 frequency conversion rooms, and 2 power distribution rooms. The establishment and operation of this fracturing equipment testing center represents an important step taken by Gem Machinery to accelerate the development of its entire range of hydraulic fracturing equipment as well as its advancement in terms of intelligence. 　　It is reported that, building on the experimental facilities for gemstone machinery installed in the 10,000 kVA electric fracturing plant, this center has developed big data functions and a multi-device testing system in response to the actual needs for the systematic and intelligent development of solid-pressure products. As a result, it has become the largest fracturing equipment testing center in China, capable of handling the testing of 300 fracturing units per year. 　　It is understood that the center is equipped with a remote control system featuring independent intellectual property rights, and it boasts functions such as highly integrated automated remote control, comprehensive safety monitoring and warning systems, data collection and storage, as well as analysis of test curves. It supports all types of tests related to both traditional diesel and electric-driven equipment, including tests on static pressure, dynamic pressure, pump control, sand mixing, mixture preparation, fluid supply, cementing, and networked operation coordination. It can meet the needs for various critical comprehensive tests, including no-load tests, light-load tests, full-load tests, reliability tests, and parallel operation tests with conventional fracturing equipment, for fracturing units with hydraulic powers ranging from 2500 to 7000 horsepower, as well as for various types of instruments and sand mixing units. Up to 4 sets of high-pressure equipment and 1 set of low-pressure equipment can be tested simultaneously. At the same time, the center is equipped with dust collection and post-treatment systems, as well as noise control systems, to effectively ensure the safety of personnel and equipment during testing, as well as environmental protection and noise reduction.