Thread Content
The last edit to this post was made by Zaihui Kangqiao on 2015-9-22 at 10:55. The Chemical Engineering Theory section is now launching a \"One Question per Day\" activity aimed at helping everyone reinforce their basic knowledge in chemical engineering. Subsequent series such as \"Principles of Chemical Engineering,\" \"Mass Transfer and Separation,\" \"Thermodynamics in Chemical Engineering,\" and \"Chemical Process Engineering\" will also be introduced. We hope for your active support! Answers to the questions in the \"One Question per Day\" activity can be viewed directly, and the thread will be closed after 1 day ! Participation earns 2 wealth points, with an additional 3 wealth points for correct answers. Fill-in-the-blank question: The ratio of the distribution coefficients of components A and B – can it be used for ________ extraction and separation? Can
The ratio of distribution coefficients is equal to 1, so extraction separation is not possible
The ratio of the distribution coefficients of components A and B – (can it) (it can) be used for extraction separation.
The ratio of the distribution coefficients of components A and B is greater than 1; therefore, ___it is possible to_____ separate them by extraction.
The ratio of the distribution coefficients of components A and B – can it be used for ____extraction separation____?
I’m not quite sure what the original poster means. Could you explain it in more detail? Thank you
Fill-in-the-blank: The ratio of the distribution coefficients of components A and B = 1; (can it) ___ not _____ be separated by extraction.
The ratio of the distribution coefficients of components A and B: can it be __>1? If so, ______ extraction separation is possible
The ratio of the distribution coefficients of components A and B – (can it) __be used to______ achieve extraction separation.
The ratio of the distribution coefficients of components A and B – can extraction separation be achieved? _Yes__ it is possible.