Reactor airtightness test
Thread Content
The design pressure for the reactor vessel body is -0.1 MPa, while the design pressure for the jacket is 0.8 MPa. The medium inside the vessel body is highly hazardous, so a leak test is required. How should the value for this leak test be determined? Thank you.
For the airtightness test, the inner tank should be tested at a positive pressure of 0.1 Mpa.
The inner tank should be pressure-tested at a positive pressure of 0.125 MPA.
If high-risk media are inside the cylinder, conduct a airtightness test at 0.1 MPa on the cylinder