How to handle the displacement of pipes on the pipe tray? The pipes are over 100 meters long, have a DN500 diameter, and are insulated
Thread Content
How to handle the displacement of pipes on the pipe tray? The pipes are over 100 meters long, have a DN500 diameter, and are insulated
To accommodate expansion and contraction in U-shaped bend pipes, fixed pipe supports are used on both sides, while a sliding pipe support is used in the middle.
Does the master have any diagrams for U-shaped pipe repair?
This requires design and calculation; it cannot be increased arbitrarily, and fixed brackets also need to be designed
For U-shaped compensation, simply calculate the stress; regarding the dimensions of the U-compensator, if the temperature is not high, one can refer to the parameters provided in manuals such as the Petroleum and Chemical Process Piping Installation Design Manual.
Pipe expansion is directly related to temperature; natural compensation is utilized, and supports also need to be designed.
Guys, is there a construction plan? Could you please explain it?
To accommodate expansion and contraction in U-shaped bend pipes, fixed pipe supports are used on both sides, while a sliding pipe support is used in the middle.
For such large pipes, expansion joints can be considered; natural compensation, on the other hand, requires a suitable location