【Daily Question】Chemical Engineering Principles 284: High conductivity of water output from mixed-bed resins (January 4)
Thread Content
This post was last edited by Zaihui Kangqiao on 2016-1-13 at 16:34. The Chemical Engineering Theory section is launching a \"One Question per Day\" campaign starting today, aimed at helping everyone reinforce their basic knowledge in chemical engineering. Subsequent campaigns will cover topics such as \"Principles of Chemical Engineering,\" \"Mass Transfer and Separation,\" \"Thermodynamics in Chemical Engineering,\" and \"Chemical Process Engineering.\" We hope you will give it your active support! Wishing everyone a happy Christmas! Answers to the questions in the \"One Question per Day\" campaign can be viewed directly; the thread will be closed after 1 day ! To encourage continued participation from everyone this year! Participation earns 3 wealth points, with an additional 4 wealth points for correct answers~~~ Short answer question: What are the reasons for high conductivity in the water output from a water treatment mixed-bed? Answer: 1) Poor water quality at the outlet of the anion and cation beds; 2) The inlet valve for backwashing is not closed properly; 3) Leaks at the acid and alkali inlets of the mixed bed; 4) Excessive amount of anion resin
What are the reasons for high conductivity in the water output from a water treatment mixed-bed? 1) The water quality from the anode and cathode beds is poor ； 2) The backwash inlet valve is not closed properly ； 3) Leakage at the acid and alkali inlet of the mixed-bed reactor ； 4) Excessive cation resin
1) Poor water quality from the anion and cation beds 2) The inlet valve for backwashing is not closed properly 3) Leaks at the acid and alkali inlets of the mixed bed 4) Excessive amount of anion resin
1) The water quality from the anode and cathode beds is poor ； 2) The backwash inlet valve is not closed properly ； 3) Leakage at the acid and alkali inlet of the mixed-bed reactor ； 4) Excessive cation resin ；
What are the reasons for high conductivity in the water output from a water treatment mixed-bed? The reasons are: 1) Poor water quality from the anion and cation beds; 2) The inlet valve for backwashing is not closed properly; 3) Leaks at the acid and alkali inlets of the mixed bed; 4) Excessive amount of anion resin
1) Poor water quality at the outlet of the anion and cation beds; 2) The inlet valve for backwashing is not closed properly; 3) Leaks at the inlet valves for acids and bases in the mixed bed; 4) Excessive amount of anion resin
1) The water quality from the anode and cathode beds is poor ； 2) The backwash inlet valve is not closed properly ； 3) Leakage at the acid and alkali inlet of the mixed-bed reactor ； 4) Excessive cation resin.
1) The water quality from the anode and cathode beds is poor ； 2) The backwash inlet valve is not closed properly ； 3) Leakage at the acid and alkali inlet of the mixed-bed reactor ； 4) Excessive cation resin ；
Answer: 1) The water quality of the effluent from the anion and cation beds is poor. 2) The backwash inlet valve is not closed properly. 3) Leakage at the acid and alkali inlet of the mixed-bed. 4) Excessive cation resin.
What are the reasons for high conductivity in the water output from a water treatment mixed-bed? 1) The water quality from the anode and cathode beds is poor ； 2) The backwash inlet valve is not closed properly ； 3) Leakage at the acid and alkali inlet of the mixed-bed reactor ； 4) Excessive cation resin ；
1) The water quality from the anode and cathode beds is poor ； 2) The backwash inlet valve is not closed properly ； 3) Leakage at the acid and alkali inlet of the mixed-bed reactor ； 4) Excessive cation resin ；