To convert a local magnetic flap level gauge into a remote-type one, what needs to be added?
Thread Content
There are several magnetic flap level gauges on site at the moment, and they do not have a 4-20 milliampere output for remote transmission. I need to add this remote transmission function; what additional equipment do I need to purchase to achieve this?
Personal recommendation: 1. Buy a double-flange level gauge, add two tees, and convert it to a double-flange + magnetic flip-disc design. 2. Contact the manufacturer to have your magnetic flap replaced with one that comes with remote transmission; it’s not cheap anyway. 3. Use another level gauge... You’re not planning to modify a 4–20mA transmitter on the magnetic flip board yourself, are you?……
It is best to reorder a magnetic float level gauge with remote transmission.
At the beginning of the year, someone trained us on level gauge knowledge; otherwise we would have had trouble understanding the issues, haha
A magnetic flap signal conversion tube – just attach it next to the magnetic flap and that’s it. Some of us really do make those changes.
Order magnetic flap transmitters directly from us; contact information is available in the materials on the left
It is sufficient to order a transmitter with the same range; suitable transmitters include those of the reed-type variety that come as part of magnetic flap level gauges； Magnetostrictive transmitters, which offer high precision. Method of use: they are simply attached directly to the original magnetic flap level gauge tube, and wiring is used to transmit signals to the control room
Magnetic flap switches and conventional level transmitters cannot share the same pressure tap. One can only choose a magnetostrictive transmitter that is compatible with the magnetic flap; or, in cases where the signal from the magnetic flap is converted, the movement of the float inside the magnetic flap causes the float inside the signal conversion tube to move as well, thereby enabling level measurement. Some magnetic flaps come equipped with functions for remote level transmission and level switch protection – these fall into this category
It has to be purchased again; it cannot be modified
You can simply purchase the remote transmission components directly from the manufacturer.....