Thread Content
Which of the following statements are incorrect? A. For the separation of systems with large load variations, a floating valve tower B is advisable. For the separation of corrosive streams, a plate tower C is recommended. For the separation of substances containing solids, a packed tower D is recommended. For the separation of foamy systems, a packed tower is advisable. I think the answer is ABC, because it is stated in the Tianjin University version that when the load variations are large, a plate tower is advisable. But many of the correct answers are BC. I’m confused; could you please tell me whether A is right or wrong? I would be very grateful if fellow sailors could help answer this question.
Hello: OP. As you said: since the load variation is large according to the Tianjin University version, a plate tower is preferable; the answers are BC. That’s correct, please check your meaning again!
Thank you to the person above; does a floating valve tower belong to the category of plate towers?
Float valve trays have high production capacity and can handle heavy loads; But it’s not the load that changes greatly! Please be sure to pay attention!
Look at page P549 of the association’s textbook; choosing BC is the right choice
Float valve towers have a high degree of operational flexibility; it means that the load can vary significantly. You have misunderstood this
The floating valve tower is also a type of plate tower
In BC questions, one has to select the incorrect option! Float valve towers have a high degree of operational flexibility and can handle large variations in load – there was a misunderstanding regarding this point earlier; for separating corrosive substances, packed towers are more suitable; for separating substances containing solids, plate towers are preferable; when it comes to separating foamy substances, packed towers may cause the foam to break up, so packed towers are not the best choice in such cases.