Difference between duct-type and pipe-type sensors
Thread Content
In ventilation and air conditioning systems, there are duct-type sensors and pipe-type sensors; being instruments of the same type, they should operate on the same principle. So if there are differences between duct-type and pipe-type sensors, what exactly are those differences? I seek advice from those who are more knowledgeable
For example, instruments for measuring temperature, pressure, and flow – what are the differences between those designed for air ducts and those designed for water pipes?
I’m not very familiar with ventilation systems; they seem to fall under the category of civil engineering. But I’ve never seen any meters used in ventilation systems before Are you referring to contact and non-contact? These are two different types of instruments... Then there’s direct measurement and indirect measurement... I can’t see what the difference is between measuring gases and measuring liquids; aren’t ventilation systems all about gases? It is recommended to ask the civil engineering department……
Regarding the classification of duct types and pipe types in ventilation and air conditioning as mentioned by the architect, I’m not sure what the purpose of such a distinction is
Regarding the duct-type and pipe-type systems mentioned by architects in the context of ventilation and air conditioning, since most wind and water conditions can be measured, it’s unclear why there is a need to distinguish between duct-type and pipe-type systems. Is it simply because those installed on ducts are called duct-type systems, while those installed on pipes are called pipe-type systems?
Regarding the duct-type and pipe-type systems mentioned by architects in the context of ventilation and air conditioning, since most wind and water conditions can be measured, it’s unclear why there is a need to distinguish between duct-type and pipe-type systems. Is it simply because those installed on ducts are called duct-type systems, while those installed on pipes are called pipe-type systems?