Does the ratio of the gas volumetric flow rate after the pressure relief valve to that before the valve roughly conform to pV=nRT?

2016-04-07View Original

Thread Content

Gentle masters! The equipment requires 1,500 cubic meters of air per hour; the flow rate should be around 500 cubic meters per hour. With air at 0.6 Mpa passing through a pressure regulator, will this ensure a volume flow rate of 1,500 cubic meters per hour? The diameter of the pipe downstream of the valve can be increased.

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.

Does the ratio of the gas volumetric flow rate after the pressure relief valve to that before the valve roughly conform to pV=nRT?

Thread Content

Related Threads in This Forum

← Previous

Next →

Submit a Project

Disclaimer

Quick Links