Diagnosing the condition of production equipment using radioactive instruments
Thread Content
Question: To perform online condition diagnosis on operating production equipment, including liquid levels, interfaces, flow rates, etc., within pipelines, using radiation sources and probes. Do any of you have previous experience with suppliers you have used? Thank you!
We have 14 nuclear instruments here for level measurement, with cesium as the radiation source
Thank you! “\"Conventional\" radioactive level gauges and level switches have already been used in this device. It is now a temporary measure to determine the actual operating conditions of some pipelines for the sake of appearance.
It is now necessary to determine the actual operating conditions in some pipelines in order to diagnose problems, on a temporary basis； This requires different treatment depending on the specific material; generally, radioactive sources are not needed for inspecting pipelines, unless testing is required after the pipelines have been welded ； The other main things that need to be checked are probably related to the tank area, right?
This post was last edited by *aojiaoya0546 on 2016-11-8 at 17:12. Hello, you can contact me through the in-site messaging system. The source-based devices used in online monitoring systems typically include those for measuring online density, liquid level, and flow rates, with these values being determined through physical measurement methods