Utilization of residual heat in flash drying exhaust gas
Thread Content
The flash dryer that was just installed in the unit is heated by heat transfer oil fed into the air, at a temperature of 180-200 degrees. The exhaust temperature is 80-95 degrees; now I want to use this exhaust temperature to heat the incoming air, thereby achieving energy savings. The power of the intake fan is 15 kilowatts, with an air volume of 14,000–16,000 m3/hour. The exhaust fan has a power of 55 kilowatts, with an air volume of 17,172–19,319 m3/hour. Those with experience in this area, please suggest a solution or recommend a professional manufacturer. Thank you! It’s best if it’s from Shandong.
Zibo Yingliwei Energy Technology Co., Ltd. 05332272018
It depends on the process parameters of your entire system; both exhaust temperature and humidity have an impact on heat recovery.
Do you deal in drying services? Our company needs to install a dryer for drying sludge; the heat source will be hot air, with a temperature range of 180°C to 250°C, and an air flow rate of 15,000 cubic meters per hour. We’re just not sure what the drying results will be
For sludge drying, hollow paddle dryers are generally used. Those in need can contact me at Q 245059685 to discuss the specific equipment parameters
We are only a manufacturer of flash drying equipment; I can help you prepare a plan for this. Q: 245059685. Thank you