Coke tower shaking
Thread Content
After cutting the tower, the old tower was changed from low-volume blowing to high-volume blowing; as a result, the old tower started to shake, and the blowing volume also fluctuated. I would like to know what causes this shaking and whether it can be resolved. Our processing capacity is 45 tons of slag and 45 tons of diluted asphalt per hour
Raw material issue: reduce the amount of asphalt used.
Personally, I think it’s a matter of the raw material ratio – there’s too much asphalt. Do you mean horse tallow by \"horse dregs\"? Ta Huang might be related to these Ma Run oils; a pellet reef might form!
The mixing ratio is too high; the pellets are about to become coked. This has happened to us before, and it’s very dangerous – it can easily lead to the collapse of the coked layer or blockages in the holes. Be careful
It is caused by an excessive blending ratio of Ma Rui oil, which results in a high content of asphaltenes.