【Learn Ethylene Together】Five questions per day to easily learn about ethylene – 52 sessions

Thread Content

【Learn Ethylene Together】Five questions per day to easily learn about ethylene. 52 6. The higher the temperature of the pyrolysis reaction, the easier it is for the reaction to take place, and the greater the degree of pyrolysis; as a result, the yield of ethylene increases. 7. Secondary steam injection is used to address the issue where the dry point temperature of heavy feedstocks is higher than their cracking temperature, thereby preventing coking when the feedstocks are preheated by convection. 8. Adjusting the inlet flow rate of a centrifugal pump can easily cause cavitation, thereby damaging the pump. 9. In terms of heat transfer efficiency, the material to be heated or cooled should flow through the shell side of the heat exchanger. 10. The higher the dew point of the pyrolysis products, the slower the coking rate in the waste heat boiler of the pyrolysis furnace. 6. The higher the pyrolysis temperature, the easier the reaction proceeds, the greater the degree of pyrolysis, and thus the higher the ethylene yield. × 7. Secondary steam injection is used to address the issue where the dry point temperature of heavy feedstocks is higher than their cracking temperature, thereby preventing coking when the feedstocks are preheated by convection. √ 8. Adjusting the inlet flow rate of a centrifugal pump can easily cause cavitation, thereby damaging the pump. √ 9. In terms of heat transfer efficiency, the material to be heated or cooled should flow through the shell side of the heat exchanger. × 10. The higher the dew point of the pyrolysis products, the slower the coking rate in the waste heat boiler of the pyrolysis furnace. ×