Selection of laboratory-grade acetylene hydrogenation flow meters
Thread Content
I am setting up a device for the selective hydrogenation of acetylene in the laboratory. When selecting a flow meter, I found that the domestic Qixing D07 series available on the market does not meet the requirements of my experiments; specifically, its output flow is not stable, resulting in poor reproducibility in the experiments. Now I have two options: either go with the higher-end CS200 series from Qixing, or choose the Brooks 5850E series. The Brooks model is about a thousand yuan more expensive. Could everyone please help me determine which one would be better?
In other words, a model with a low flow rate of around 5-10 sccm, at a price of approximately 8000-10000 per unit; the pressure should be below 3 Mpa. Could anyone recommend one? Thank you!
Our company specializes in the production of small-volume gas mass flow meters for laboratory use. If you are interested, feel free to take a look; send me a private message if you need any information
Thank you, I don’t need it. It’s just a choice between these 2
It’s okay; you can contact me if you need it in the future