Countermeasures against scaling at the end of circulating water
Thread Content
Due to the low flow rate of the circulating water in the end water cooler, the water cooler often suffers from scaling, mud blockage, debris, etc., and the cooling effect is not good. I wonder if you have any good methods, and I would like to discuss it with you. :)
It was found that the heat exchange effect was not good and multiple backwashes were performed.
Backwash regularly or use steam flushing.
I know of a purely physical descaling equipment that absorbs scale, removes rust, sterilizes, and inhibits algae. It is very effective in treating microbial growth and slime.
Starting from the root cause, improving water quality and supplementing it with anti-scaling mechanisms can effectively solve the scaling problem. Contact me on WeChat dengjun122927
I have a good solution to your problem, I’m not bragging.
The quality of circulating water must be well controlled, and condensation drainage should be added at the end to solve the problem of dead corners.