Seek methods to reduce pipeline pressure: from 50 MPa to 1 MPa
Thread Content
Methods to reduce pressure in a pipeline: From 50 MPa to 1 MPa, with the liquid being water at 20–80 °C, how many methods are there? Thank you first!
Water at 20~80 degrees, the original poster explained it very clearly.
1. For large volumes, first perform work (such as power generation), then carry out heat exchange, and finally reduce temperature and pressure. 2. For small quantities, simply use a temperature-reducing pressure regulator.
If you don’t need that 1.0 MPa steam, just use a large tank and let the steam bubble directly.
How precise is it needed? A high-regulation valve is required, not a orifice plate.
Check the water volume; if it is high, the hydraulic turbine will be used for recovery
With such a large pressure difference, if the volume of flow is high, it’s possible to generate electricity using the excess pressure; if the volume is low, there’s no need for that, and a pressure reducing valve can be used for adjustment.
Is there such a pressure relief valve? Recommended manufacturers, thank you!