Analysis method for opening reinforcement
Thread Content
This post was last edited by Yizhuo Guobao Rou on 2016-10-23 at 20:11. GB150-2011, Section 6.6, outlines the calculation process for the analytical method. During its application, I have a question that I hope everyone can help me with. As can be seen from Figure 6-13, the λ values corresponding to different opening ratios (0.1–0.9) and different wall thickness ratios are provided; what should be done in the case of intermediate values? For example, ρ=0.411, with a thickness ratio of 1.15. Thank you all! !
Please take a look at Table 6-2 on page 167; it contains the detailed calculation steps