Feel free to ask questions regarding water ring vacuum pumps
Thread Content
I work for a manufacturer of water ring vacuum pumps, a well-known large enterprise in China. To avoid being accused of advertising, I won’t mention the company’s name. If you have any questions or need information regarding water ring vacuum pumps, feel free to ask below. I will definitely help you answer them as soon as I have time. Thank you all.
I would like to ask: if the impellers of a water ring vacuum pump are damaged due to cavitation, how can cavitation in such pumps be avoided?
Due to the properties of water and vacuum, cavitation in vacuum pumps cannot be completely eliminated; it can only be prevented. The general methods for reducing and preventing it are as follows. 1: Reduce the inlet water temperature of the vacuum pump; if it is circulating water, it is advisable to use devices such as heat exchangers to lower the water temperature. II: Install cavitation protection devices. Three: Equipped with an atmospheric ejector. This method is similar to the cavitation protection device, but it is more effective. IV: Using a liquid with a lower saturation vapor pressure as the working fluid (liquids such as methanol or ethanol can be used in place of water); this method is generally not recommended for manufacturers without experience. 5: Choose high-quality materials for the impeller selection, such as alloy steel, stainless steel, and integrally cast impellers.
I have chosen a water ring vacuum pump with a suction capacity of 30 cubic meters per minute for dry water and 1.2 cubic meters per minute for wet water. What size should the gas-water separation tank be? Could the theoretical basis and calculation formulas be uploaded together for me to study? Thank you very much!
Methanol and ethanol are absolutely not suitable; what you might be referring to is an aqueous solution of ethylene glycol used as a coolant.
A water ring vacuum pump is used to evacuate the reactor; since the main substance involved is alcohol vapor, does the vacuum pump need to be equipped with an explosion-proof motor?