Thread Content
This post was last edited by hesonchang214 on 2016-11-19 at 21:13. Industry standard of the People’s Republic of China: Code for design of nursery and kindergarten buildings, JGJ 39-2016. Authority that approved it: Ministry of Housing and Urban-Rural Development of the People’s Republic of China. Date of implementation: November 1, 2016. Announcement No. 1079 issued by the Ministry of Housing and Urban-Rural Development: Announcement regarding the issuance of the industry standard “Code for design of nursery and kindergarten buildings”. The “Code for design of nursery and kindergarten buildings” has been approved as an industry standard, with the code number JGJ 39-2016; it shall come into effect as of November 1, 2016. Among them, clauses 3.2.8, 4.1.3, 4.1.9, 4.1.12, and 6.3.3 are mandatory provisions that must be strictly enforced; the original \"Code for Design of Nurseries and Kindergartens\" JGJ 39-87 is hereby repealed. These specifications were compiled by the Standard and Quota Research Institute of our ministry and published by China Architecture & Building Press. Ministry of Housing and Urban-Rural Development of the People’s Republic of China, April 20, 2016 Preface In accordance with the requirements set out in the Ministry of Housing and Urban-Rural Development’s “Notice on the Issuance of Relevant Standards” (Document No. Jianbiao 88), the standardization compilation team conducted extensive research and investigations, carefully summarized practical experience, referred to relevant international standards and advanced foreign standards, and, after seeking wide-ranging opinions, revised the “Code for Design of Kindergartens and Nursery Schools” JGJ 39-87. The main technical contents of this specification are: 1. General provisions ； 2. Terminology ； 3. Base and general layout ； 4. Architectural design ； 5. Indoor environment ； 6. Building equipment. The main technical changes in this revision are as follows: 1. Added technical content and regulations related to “terms” and “indoor environment” ； 2. Relevant provisions on “safety assurance,” “environmental protection,” and “energy conservation” have been added ； 3. Chapters such as “Fire Protection and Evacuation” and “Building Construction” have been removed, with their content transferred to relevant chapters. The provisions marked in bold in these specifications are mandatory and must be strictly implemented. The Ministry of Housing and Urban-Rural Development is responsible for the management of these specifications and for interpreting the mandatory provisions, while the Heilongjiang Provincial Architectural Design and Research Institute is responsible for explaining the specific technical details. If you have any suggestions or comments during the implementation process, please send them to Heilongjiang Provincial Architectural Design and Research Institute (address: No. 1 Gogoli Street, Nangang District, Harbin, postal code: 150008). Principal drafting unit of this specification: Heilongjiang Provincial Architectural Design and Research Institute. Contributing units to this specification: Harbin Institute of Technology, Shanghai Architectural Design and Research Institute, Zhongnan Architectural Design and Research Co., Ltd., China Architecture Northwest Design and Research Institute Co., Ltd., Chongqing Design Institute, Guangdong Provincial Architectural Design and Research Institute. Main drafters of this specification: Xu Qin, Jing Tao, Jiang Chunhui, Lian Xuejun, Chen Yongjiang, Li Guiwen, Wu Jianmei, Shen Kewen, Lin Li, Zheng Li, Chen Biao, Xu Daming, Wang Xiaoliang. Main reviewers of this specification: Gu Jun, Wang Shansheng, Weng Hao, Zhang Nanning, Wu Xueling, Wang Jue, Chen Xiangming, Ye Deqiang, Guo Xiaoyan