Causes of increased compressor temperature and solutions?
Thread Content
Reasons for abnormal phenomena: 1. Insufficient cooling water volume or water supply interruption； 2. Insufficient lubricating oil in the engine ； 3. The circulation valve is not closed properly or there is internal leakage ； 4. The reed or spring is damaged. Solution: 1. Adjust the water volume or shut down the machine ； 2. Add lubricating oil ； 3. Close the valve tightly or stop the machine to repair it ； Park the vehicle to replace spare parts.
This post was last edited by ddfmy on 2016-11-23 at 11:38: 1. Excessive clearance in the compressor cylinder； 2. Damage to the intake and exhaust valves serta piston rings in the compressor ； 3. Leakage in the compressor safety bypass valve ； 4. Excessively high compressor suction temperature ； 5. Interruption of lubricating oil in the compressor cylinder ； 6. The suction pressure of the compressor is too low, or the suction valve is opened too slightly ； 7. Damage to the insulation layer ； There is a blockage in the compressor suction pipeline or filter. 8. Slow gas flow speeds can lead to overheating, as well as excessive resistance in the compressor return pipeline. Resulting in an increase in exhaust temperature ； 9. Excessively high condensing pressure of the refrigeration compressor ； There is oil scale or water scale in the condenser, etc ； 10. Insufficient amount of cooling water in the compressor cylinder head water jacket ； Or the cooling water temperature is too high ； 11. If the evaporation area is too large ； The cooling capacity of the compressor is lower than that of the warehouse equipment. 12. Excessive resistance in the compressor exhaust pipeline ； 13. The throttle valve of the refrigeration compressor is opened too wide or is blocked ； 14. Poor efficiency of the compressor itself ；