Are the steel cylinders used for your analysis stored inside a gas cabinet?
Thread Content
The experts recommended that the gas cylinders be placed inside a gas cabinet, stating it wasn’t expensive, and the company plans to spend the money on purchasing them! Has everyone used it? Is it good? Shall we take a look at the previous picture?
The steel cylinders used for analysis are generally placed in a separate small room outside the analysis building, with small tubes connected via stainless steel couplings leading to the analysis room. There are several advantages to having them in that external room: 1. Since the cylinders are pressure vessels, storing them separately ensures safety； 2. The gas cylinder is easy to replace and convenient for storage ； 3. Even if the gas cylinder leaks, the hazards are minimized.
Agree with the second floor suggestion; we should place it in an outdoor small room, preferably one that is well-ventilated on all sides.
Where you are, it might be integrated, but here I have an analysis room in each workshop, with analysis cylinders outside each workshop; it’s too difficult to build separate small rooms. That’s why experts recommend using gas tanks.
Is it the only place in the whole factory where analysis is done? I have several of these.
The laboratory occupies one entire floor; the gas cylinders are stored in a small room downstairs, and the gases to be analyzed are delivered to the analysis instruments via pipelines.
Also, due to being drunk, a separate analysis room is set up in each workshop; such an arrangement makes it difficult to manage the staff, as well as to control drugs, equipment, and substances that can be used for drug production.
There’s nothing I can do; the analysis during the production process here is handled by the people in the workshop.
Depending on the needs and division of labor, it is also possible to conduct analyses in several separate locations. My company has a similar situation; we also have a dedicated room for storing gas cylinders. If there is a dedicated gas holder, the cost might be similar; that would be even better
In most corporate analysis laboratories, the gas cylinders are stored outside, adjacent to the laboratory, within a enclosure made of welded rebar and covered with colored steel sheets to protect them from sunlight; proper ventilation is ensured, and measures are taken to prevent the cylinders from toppling over.
We have not installed a gas holder, as mentioned on the 10th floor.