Fire separation distances for Class A workshops in petrochemical regulations
Thread Content
Now, a chemical (non-petroleum) project that is classified as an explosion-hazardous project requires the application of petroleum industry regulations. I would like to ask everyone: Table 4.2.12 of the petrochemical regulations specifies the fire separation distances between Class A process units. Therefore, the distance between two Class A buildings is determined based on those Class A process units, ranging from 25 meters to 30 meters. Still, the building spacing shall be 12 m as required by the building codes, rather than the spacing not specified in the petrochemical regulations. In other words, whether a Class A factory building is considered a Class A process unit.
This post was last edited by asmedia on 2016-12-29 at 23:05. The statement from the Work Safety Administration is that one should follow the regulations strictly; since you’ve already mentioned following the petrochemical industry rules, there’s nothing more to discuss.
Experts from a certain place told me that a Class A factory building is considered a building, and not a Class A process unit; therefore it falls outside the scope specified in Table 4.2.12. I’m at a loss and don’t understand this, so I’m asking everyone for clarification
In the event of any conflicts, stricter standards are to be followed. Both sets of regulations are in use nowadays: buildings are generally governed by building codes, while the process equipment within them is regulated by petrochemical standards. So it’s necessary to make a comparison first, and then consult experts and follow their advice. Don’t get entangled and hold on tightly.
30 meters; otherwise, it will be very troublesome for the inspection upon completion in the future
Agree to 30 meters； I’ve learned it.* :):):):)
One major premise is: does your overall plan indicate that construction regulations should be followed? Petroleum regulations? Or a fine ruler? According to petrochemical regulations, the general layout requirement is a strict 30 meters.
Has it been solved? Is there a definite answer to this?
According to the petrochemical regulations, it is considered a facility; whether it is located outdoors or in a building, it must at least be operated in accordance with the detailed regulations