Five valve group for help
Thread Content
Has anyone seen such a five-valve group, which one is the high and low pressure valve, and which one is the exhaust valve?
On the side is a test valve, which can be calibrated and drained. The transmitter body also has a drain valve.
This post was last edited by DTDT on 2019-4-24 08:58. The red one in the middle is the one connecting the gas lines at both ends. It should be the high and low pressure valves you mentioned. The valves at both ends may be exhaust valves. There is also another structure that is a cut-off valve. This is based on the amount determined during selection. Why can't I upload a picture? I have a picture. . .
The red valve group in the middle is the balancing valve. The blue valve group under the red is the high-pressure side valve group. The blue valve group above the red is the low-pressure side valve group. The top and bottom two are drain valves.