HCBBS Forum (日本語)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

ちくしょう、みんなで原因を分析してみよう

2015-12-14View Original

Thread Content

給料配管は、熱交換器の前段が8.8MPA、後段が8.3MPAですが、奇妙なことが起きています。前段の配管圧力は変わらないのに、後段の圧力は毎日9時から12時頃にかけて8.9~9.1MPAまで変動します。何が原因でしょうか?1ヶ月間観察したが、毎日同じだった。(圧力変送器はEJAのものです)
Reply #22015-12-14
インストール用の画像を送って、分析しましょう。
Reply #32015-12-14
干渉かもしれません。振動が始まったら、段階的に信号発生器で信号を与える。
Reply #42015-12-14
温度が上昇して圧力が増加しているのか確認してみましょう。
Reply #52015-12-14
環境温度に関係している可能性があります。9~12時は1日の中で最も気温が高くなる可能性があり、配管に断熱処理がなく太陽光が直接当たるため、圧力が上昇する。
Reply #62015-12-14
現地圧力計はありますか?圧力が変動する際、現地圧力計とEJAは同期して変動しますか?
Reply #72015-12-14
計器の問題に加えて、温度の影響かどうかも確認する必要があります
Reply #82015-12-14
8.3波から9.1MPAで、温度の影響がこれほど大きくなるはずがない
Reply #92015-12-14
現地にはなく、傾向は緩やかに上昇し緩やかに下降する
Reply #102015-12-14
王兄の言う通りです。あんなに高いところまで上がると、太陽の光を浴びて、人間でも爆発してしまうでしょう
Reply #112015-12-14
その配管の温度は246で一定に保たれている℃

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.